Configure your emergency and safety lighting in just a few steps.
NOTE
A follow-up article for this product is available: PMW423SC
KCW423SC-IP64
Slim convex plastic luminaire.
Use as an emergency exit sign luminaire for wall mounting in which the set of plug-in pictograms is fitted on the inside without the use of solvents.
Or without the use of pictograms as a safety luminaire with the crystal-clear cover included, preferably for ceiling mounting.
Automatic monitoring of safety luminaire with SelfControl.
Product data
Recommended areas of application
DOWNLOADS
Accessories
Light calculation
The spacing table is based on the following parameters:
- l Maintenance factor: 0.80
- l Emergency lighting factor: 1.00
- l Minimum illuminance on centre line: 1.00 lx
- l Minimum illuminance on half of escape route width: 0.50 lx
- l Diversity on the centre line max. 40 : 1
- l Width of escape route: 2.00 m
Calculation based on the RELUX online interface.
The spacing table is based on the following parameters:
- l Maintenance factor: 0.80
- l Emergency lighting factor: 1.00
- l Minimum illuminance on centre line: 1.00 lx
- l Minimum illuminance on half of escape route width: 0.50 lx
- l Diversity on the centre line max. 40 : 1
- l Width of escape route: 2.00 m
Calculation based on the RELUX online interface.
The spacing table is based on the following parameters:
- l Maintenance factor: 0.80
- l Emergency lighting factor: 1.00
- l Minimum illuminance on centre line: 1.00 lx
- l Minimum illuminance on half of escape route width: 0.50 lx
- l Diversity on the centre line max. 40 : 1
- l Width of escape route: 2.00 m
Calculation based on the RELUX online interface.
The spacing table is based on the following parameters:
- l Maintenance factor: 0.80
- l Emergency lighting factor: 1.00
- l Minimum illuminance on centre line: 1.00 lx
- l Minimum illuminance on half of escape route width: 0.50 lx
- l Diversity on the centre line max. 40 : 1
- l Width of escape route: 2.00 m
Calculation based on the RELUX online interface.